The Government of India's Petroleum and Explosives Safety Organization (PESO) Chief Controller of Explosives (CCOE) issues approvals to products for hazardous environments that conform to Indian standards. Approval from the CCOE is mandatory for all electrical equipment installed in explosive or potentially explosive atmospheres.
Euroswitch have experience certifying instrumentation such as proximity/limit switches, flow/level switches, pressure switches/sensors and vibration sensors/accelerometers for use in all hazardous areas including those requiring PESO-CCOE approvals. These areas typically include petroleum refineries, storage installations, storage sheds, service stations or any other place where petroleum/LPG/CNG is refined, blended, stored, loaded/filled or unloaded.
For the purpose of installation of electrical equipment, the areas have been divided into 3 categories of hazardous areas namely :
Zone 0 area where inflammable gas and vapour are expected to be continuously present eg., inside the tank.
Zone 1 area where inflammable gas and vapour are expected to be present under normal operating conditions eg., on the mouth of the vent pipe or near fill point, unloading point etc., during the operation.
Zone 2 area where inflammable gas and vapour are expected to be present under abnormal operating condition eg., during the failure or rupture of the equipment.
Explosive gases are classified under two broad categories. with Group II being split into 3 subcategories.
The Euroswitch FS Series proximity switches utilise proven magnetic technology enabling them to sense ferrous material, such as carbon steel or stainless steel (17/4 or 400 series) at up to 2.5mm (0.1″). Volt free SPCO/SPDT or DPCO/DPDT contacts which are highly flexible and able to switch voltages up to 240V either AC or DC.
Need Help?
Not sure which product you require, please use our product configurator...
The Euroswitch ES Series proximity switches utilise proven magnetic technology enabling them to sense ferrous material, such as carbon steel or stainless steel (17/4 or 400 series) at up to 2.5mm (0.1″). Volt free SPCO/SPDT or DPCO/DPDT contacts which are highly flexible and able to switch voltages up to 240V either AC or DC.
Need Help?
Not sure which product you require, please use our product configurator
The Euroswitch RS Series proximity switches Euroswitch RS Series switches are highly dependable, hermetically sealed position sensors. They require the use of a magnetic target to operate. Each model is manufactured specialised resins housed in industry-standard styles suitable for many use.
Euroswitch VI Series modular valve indication packages, designed for the direct mount to quarter turn Namur actuators are ideally suited to the process industry, they also carry the latest intrinsically safe and explosion and encapsulation certification for Zone 0 & 1. Indication is available in a variety of ways both electrically and visually.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. In efficitur aliquet felis accumsan ullamcorper. Nullam blandit, orci nec elementum lacinia, diam magna placerat odio, in tincidunt metus eros id libero.
Need Help?
Not sure which product you require, please use our product configurator
The Euroswitch FL Series ultra compact flow switch is designed and engineered to monitor liquid flow. Globally certified, they are used in some of the most arduous and hazardous applications around the world where a reliable signal is required.
Need Help?
Not sure which product you require, please use our product configurator
Euroswitch VS Series with state of the art, highly accurate annular shear design, Globally certified they are used in some of the most arduous and hazardous applications around the world. Euroswitch is able to offer an extensive range of vibration sensors including a choice of acceleration and velocity outputs.
Need Help?
Not sure which product you require, please use our product configurator
Acceleration or Velocity 4-20mA or IEPE/ICP Voltage
Level Switches
LS Series
The Euroswitch LS range of level switches and level indicators are available for reliable indication in general industrial applications and are approved for use in ATEX, IECEx, UL/CSA, TRCU and INMETRO hazardous zones.
The Euroswitch PS range of pressure switches are available for reliable indication in general industrial applications and are approved for use in ATEX, IECEx, UL/CSA, TRCU and INMETRO hazardous zones.
Euroswitch JB Series junction boxes have been designed using the latest materials and carry a full range of certification approvals. Our 75mm junction box is the smallest explosion proof junction box currently available on the market.
P433821_1
